Home page

Rebeam

REBEAM by the laser resonator designed Beam Laser output as a country. The best development engineers outside the laser are uniformly distributed spatially(Top Hat Mode ) was the best possible Beam Profile.

Email: contact@ruikd.com

WhatsApp: +86 18026368854

Inquiry Now

Rebeam

Handpiece

Automatic BalanceTechnology For Articulated Arm

With this technology helps, it can automatic calibrate to make the outputting spots more stable and energy more uniform. And it can be rotated for 360 degree. Never polarized light and the energy has no deviation.

Treatment Principle

Rebeam

Mode

SPT Mode

Output one pulse at a time Mode
Destroy the pigment by high energy.

GPT(PTP) Mode

Two radiations of high laser dual method.
Safe laser toning method that destroys the pigment softly with almost has no irritation.

HPT

Regenerate the skin cell and improve the skin elastic through the thermal effect.
Because almost have no damage to skin so doesn't affect the daily life.

Popular Treatments B&A

Technical Advantages

Laser Type	ND:YAG Laser
Beam Mode	Top Hat PM Mode(TEM00)
Energy	1064nm:up to 1500mj (single pulse)
Energy	532nm:up to 500mj (single pulse)
Opic Cooling	Heating & Cooling
Opic Cooling	AUTO Temperature Performance
TX Mode	1064nm:SPT(1500mj), GPT(2000mj), HPT(3200mj)
TX Mode	100Kg
Peak Power	300MEGA WATT
Spot Size	2 ~ 10mm
Energy Per mode	SPT:1.5J(1064nm), 0,5J(532nm)
Energy Per mode	GPT:2.0J(1064nm),
Energy Calibration	SEM1 AUTO CAUBRATION
Frequency(Hz)	SPT1~15
Rated Power	220~230VAC, 15A, 50 ~ 60Hz

FAQ

Q Is it normal for the device to get very hot while it's running?

A slight increase in temperature is normal. However, if the unit becomes hot to the touch or the temperature continues to rise, this is abnormal and is usually caused by a malfunctioning cooling fan, poor water circulation, or excessive dust buildup. You should shut down the machine immediately for inspection to prevent damage to the optical path power supply.

Q How should the phototherapy handpiece be properly cleaned and maintained?

After each operation, gently wipe the lens surface with a lint-free, soft cloth to remove dust and water spots. Do not soak the lens in large amounts of alcohol or scratch it with hard objects. Keeping the lens clear and clean can effectively prevent issues such as weak light output and uneven light spots.

Q Can photonic devices be used frequently over a long period of time?

Regular, long-term maintenance is recommended; however, extremely frequent, intensive treatments are not advised. Following a regular care routine ensures better skin tolerance and more consistent results.

Q What is the difference between at-home photonic devices and in-clinic photonic treatments?

In-clinic devices offer higher energy levels and more comprehensive features; home-use devices provide gentler energy and have higher safety thresholds, making them suitable for daily at-home maintenance and long-term results stabilization.

Q Can people with sensitive skin or thin skin undergo photorejuvenation?

Yes. The new photonic device supports low-energy, gentle output modes, combined with cooling to minimize irritation, making it suitable for daily repair and stabilization of sensitive and delicate skin.

< 1 2 >

Products Inquiry